[Zhongbo.com] Glass has been widely used in modern times and has always been a product with a large market demand. By using specific treatment methods, we can make full use of the characteristics of the glass, and can make up for its defects, no longer subject to the natural properties of the glass. For example, laminated glass can not only be insulated, but also the debris will not splash and hurt people, safe and reliable. Next we will introduce how the glass mold should be handled.
First, how to deal with tempered glass moldy
High-tech glass anti-mildew powder and other products can be used. The specific method is: first spray anti-mold liquid on the surface of the glass, and then use anti-mold paper liner or anti-mildew powder to isolate, which can delay the moldiness of the glass to a large extent.
method:
1. Wipe the glass: first wipe the glass frame with a towel, then use a glass to scrape the diluted glass aqueous solution, evenly apply the glass from top to bottom, repeat the above steps, and scrape it from top to bottom with a glass scraper. Use a dry towel to clean the water marks left on the frame. The water marks on the glass must be scraped with glass, otherwise it will leave a trace on the glass.
2, the vinegar and water in a ratio of 1:2, put into the spray, spray on the glass and then wipe, you can wipe very clean.
3, add 5% of the Amonia solution or gasoline in the basin, use it to clean the glass, wait until the glass is dry and then wipe it clean with a dry cloth, the glass can be spotless, bright and transparent. When cleaning the glass, Use the different types of window cleaners to see if it is double-glazed or single-layer glass. It is convenient, labor-saving and safe to use the window cleaner.
4, if the surface of the glass is moldy, the ratio of hydrofluoric acid (HF) to water 1:8 can be adjusted (Note: more than 1:8, will cause damage to the opponent), wipe the glass. Note: be sure to do well Corrosion protection work, the skin can not touch HF, otherwise it will be severely corroded. After wiping the glass, wipe it again with water, then dry the glass.
5, spray the glass on the cleaning agent, and then put on the plastic wrap to soften the solidified oil stains. After ten minutes, tear off the plastic wrap and wipe with a damp cloth. To keep the glass bright and bright, you must always clean it. If there are handwriting on the glass, rub it with rubber soaked water, and then wipe it with a damp cloth; if there is paint on the glass, it can be scrubbed with cotton and hot vinegar; wipe the glass with a clean dry cloth and alcohol to make it bright as crystal.
Second, how to deal with the problem of moldy glass
Before the solution, we must know the judgment of the mildew of the glass:
1. White fog, white spots: slight mildew on the glass surface due to storage time, air humidity or glass quality problems.
2. Rainbow: When the white mist and white spots appear for a long time and are not treated in time, a rainbow will form. At this time, the moldy condition only stays on the glass surface and does not corrode into the glass.
3. Sulfur change: The appearance of glass moldy is the same as that of mild mold, but the alkaline moldy component of the glass surface has been corroded into the glass, which is seriously moldy.
4. Paper printing: Like sulfur, moldy on the outside and inside of the glass, is very mildew.
In the moldy 1-2 stage, try scrubbing with a glass mold remover, and the water will be smooth.
Ladies' Skirt,Removable Collar Short Skirt,Linen Flat Neck Short Skirt,Large Pocket Suspender Short Skirt
SHAOXING NOVATEX CO.,LTD , https://www.novatexco.com